EX11 Miniature Incremental Rotary Optical Encoder |
|
The EX11 Series was developed to provide a high precision, low cost enclosed shaft encoder for light duty appliciations. The EX11 offers benefits of the Opto-ASIC desgin with 1024 line counts in a 1.1 inch diameter size.
Packaged in a glass filled polycarbonate housing with 1/8" stainless steel shaft and precision bearings, the EX11 provides superior performance at a lower cost.
The EX11 Series is capable of operating over a temperature range of 0°C to +70°C without degradation of signals.
Proven design and Duncan Electronics' experience makes the EX11 perfectly suited for high volume OEM applications, including: robotics, process control and instrumentation. |
|
|
 EX11 (2 pgs/197K) |
EX15 |
|
|
|
The EX15 Series was developed to provide a high precision, enclosed shaft encoder for light duty and small applications. The EX15 boasts 1024 line counts in a miniature 1.54" diameter package.
Capable of operating over a temperature range of 0C to +70C without degradation of signals, the EX15 Series provides superior, commercial grade performance.
A standard two-year warranty and proven design makes the EX15 a valuable product for OEM applications. |
|
| |
EX15 (2 pgs/137K) |
|
MOD 700 Low Profile Incremental Encoder Opto-ASIC Miniature Frameless Caliper |
|
|
|
Ideally suited for integration into motors or other tight packaging constraints, the BEI Duncan MOD 700 Series introduces a highly miniaturized rotary incremental encoder that accommodates a broad range of standard code disk resolutions and diameters.
The MOD 700 incorporates BEI's proven Opto-ASIC technology- a phased array photo diode IC noted for its high tolerance for axial movement, low power consumption and high operating temperature range- into a highly miniaturized lead-frame caliper desgin, offering resolutions up to 2540 PPR (Pulse Per Revolution). Weighing only 25 grams, the unit
includes integral surface mount pads for SMT installation onto PCBs or flexible circuitry. Two integrally molded orientation posts assure correct alignment onto PCB circuitry.
|
|
| |
MOD 700 (7 pgs/531K) |
|
MX15 Modular Incremental Rotary Optical Encoder |
|
 |
By the time you have read this first sentence, you could have installed BEI's model MX15 INSTA-MOUNT™ modular optical encoder. In addition to its quick and easy installation, the MX15 is designed to operate with jitter-free output signals without tight controls on shaft endplay, runout or perpediculatiry. The new
INSTA-MOUNT™ encoder is capable of perating within a temperature range of 0° to +70° C, requiring less than 30 milliamps of L.E.D. current, without degradation of output signals and is short circuit protected. The MX15 is perfectly suited for motor manufacturers and other high volume OEMs. |
|
| |
MX15 (2 pgs/93K) |
|
MX21 Modular Incremental Rotary Optical Encoder |
|
|
By the time you have read this first sentence, you could have installed BEI's model MX21 INSTA-MOUNT™ modular optical encoder. In addition to its quick and easy installation, the MX21 is designed to operate with jitter-free output signals without tight controls on shaft endplay, runout, or perpendiculatiry. The new INSTA-MOUNT™ encoder is
capable of opperating within a temperature range of -10° to +70° C, requring less than 30 milliamps of L.E.D. current, without degradation of output signals and is short circuit protected. The MX21 is perfectly suited for motor manufacturers and other high volume OEMs.
|
|
| |
MX21 (3 pgs/223K) |
|
PMX Panel Mount Incremental Rotary Optical
|
|
|
|
The PM Series Panel Mount Encoder was developed to provide control manually. It is interchangeable with standard potentiometer type panel mounting, yet provides direct digital accuracy without A/D conversion and has an exponentially longer life expectancy.
The new BEI Panel Encoder is designed for applications where position control and analog to digital conversions requre manual knob control. Standard output includes TTL quardrature with resolution up to 256. For zero referencing, an optional index is available.
Hybrid technology aids in reliable operation over a standard temperature range of 0° to 70°C. High reliability and accurate position control are possible by using non-contacting elements, including a slotted metal disc placed between a collimated infrared LED source and a common substrate sensor array. A strain relief is provided for securing
of lead terminations.
BEI's new Panel Mount Encoder is ideal for audio, instrumentation, medical and other related markets where accurate manual control is necessary. |
|
| |
PMX (2 pgs/977K) |
|
| |
|
|
*NOTE: Model KX21 has been discontinued. The closest available cross is the MX21
Model E20 has been discontinued and can be crossed with the Model H20®.
|
|
| |
|
|
